Regulations
Roofing Regulations in New Jersey: Guidelines for Your Roofer in 2023 & 2024

If you’re considering installing, repairing, or replacing your roof in New Jersey, it’s crucial to understand the roofing codes your contractor must adhere to. These codes outline guidelines for roof design, construction, and upkeep, prioritizing safety, quality, and environmental protection. Turn to our Wayne Roof Experts for guidance. If your roof is aging and in disarray, it might be time to consider a replacement. However, if you’re facing minor storm damage, a repair could be sufficient. Contact us today to schedule an inspection with one of our skilled roofing experts!

Roofing codes can differ across states, counties, and cities, evolving to meet updated standards and practices. In this guide, we’ll outline the New Jersey roofing codes for 2023 and 2024, alongside advice for selecting a skilled and trustworthy roofing contractor in the state. If you’re considering installing, repairing, or replacing your roof in New Jersey, it’s crucial to understand the roofing codes your contractor must adhere to. These codes outline roof design, construction, and upkeep guidelines, prioritizing safety, quality, and environmental protection.

Roofing codes can differ across states, counties, and cities, evolving to meet updated standards and practices. In this guide, we’ll outline the New Jersey roofing codes for 2023 and 2024, alongside advice for selecting a skilled and trustworthy roofing contractor in the state.

Following the International Building and International Residential Code, New Jersey roofing codes govern roof design, construction, and maintenance with state-specific amendments.

They address various aspects, such as design, materials, insulation, ventilation, flashing, drainage, inspection, and maintenance.

Updated every three years by the New Jersey Department of Community Affairs, these codes apply to all building types, aiming for safety, quality, performance, and environmental protection.

They require licensed and insured roofers, approved materials, and adherence to manufacturer instructions for installation and repair.

New Jersey Roofing Codes for Commercial and Residential Buildings

CategoryCommercial Roofing CodesResidential Roofing Codes
Roof Design and LoadIn accordance with Chapter 16 of the IBC, addressing structural design and load considerations for buildingsConforming to Chapter 3 of the IRC, focusing on building planning and load factors
Roof Materials and SystemsGoverned by Chapter 15 of the IBC, outlining regulations for roof assemblies and rooftop structuresGoverned by Chapter 9 of the IRC, specifying standards for roof assemblies
Roof Insulation and VentilationCompliance with Chapter 13 of the IBC, emphasizing energy efficiency in buildingsAdhering to Chapter 11 of the IRC, highlighting energy efficiency guidelines for buildings
Roof Flashing and DrainageRegulated by Chapter 15 of the IBC for roof assemblies and rooftop structures, and Chapter 16 for structural design and loadRegulated by Chapter 9 of the IRC for roof assemblies, and Chapter 8 for roof-ceiling construction

New Jersey Roofing Codes Overview

The New Jersey roofing codes stem from the International Building Code (IBC) and the International Residential Code (IRC), developed by the International Code Council (ICC), a leading nonprofit organization responsible for publishing and upholding widely accepted building codes across the United States.

The New Jersey Department of Community Affairs (DCA) oversees the state’s adoption and enforcement of these codes. Every three years, the DCA revises the building codes based on the latest editions of the IBC and IRC, along with specific New Jersey amendments.

New Jersey follows the 2018 editions of the IBC and IRC, adopted by the DCA on September 6, 2022, and enforced since March 6, 2023. The next update, anticipated in 2024, will transition to the 2021 editions of the IBC and IRC.

These regulations apply to all structures in the state, encompassing residential and commercial buildings, including existing and new constructions. They address various aspects of building design and construction, spanning structural integrity, fire safety, plumbing, mechanical systems, electrical wiring, energy efficiency, accessibility, and environmental sustainability.

Within the building codes, roofing regulations are delineated to govern the roof requirements and specifications, split into commercial and residential categories.

Commercial roofing codes pertain to non-residential structures such as offices, retail spaces, schools, hospitals, and hotels. They are based on Chapter 15 of the IBC, which delineates roof assemblies and rooftop structure standards.

Residential roofing codes, on the other hand, apply to residential buildings like single and two-family homes, townhouses, and accessory structures. These codes derive from Chapter 9 of the IRC, focusing on roof assembly standards.

These roofing codes establish minimum criteria for roof design, materials, installation, inspection, and upkeep. They also address challenges specific to New Jersey’s climate and environment, including wind, snow, ice, rain, hail, fire, solar considerations, and energy efficiency measures.

New Jersey Roofing Codes Highlights

The New Jersey roofing codes are comprehensive, covering a broad spectrum of topics and scenarios. While it’s impractical to list every detail here, we’ll spotlight some crucial regulations your roofing contractor must adhere to in 2023 and 2024.

Roof Design and Load

By New Jersey roofing codes, roof design, and load must align with structural provisions outlined in building codes, alongside manufacturer instructions and specifications. Factors considered include dead load, live load, wind load, snow load, rain load, and other influences impacting roof performance and stability.

These codes dictate minimum design loads tailored to building type, location, occupancy, climatic conditions, and geographic specifics. They offer methodologies, formulas, tables, and maps for load calculation and factor and coefficient determination.

For instance, residential buildings in New Jersey must sustain a live load of at least 20 pounds per square foot (psf). At the same time, commercial structures must withstand at least 12 psf unless otherwise stated by building codes or manufacturer directives. New Jersey roofing codes also mandate snow load calculation using ground snow load maps and prescribed analysis procedures per building codes.

Roof Materials and Systems

In accordance with New Jersey roofing codes, roof materials and systems must garner approval from either the DCA or the ICC Evaluation Service (ICC-ES), entities tasked with evaluating and certifying building products’ compliance with codes and standards. Additionally, these materials and systems must prominently display the manufacturer’s label or identification, along with the product name, model number, and approval number.

The New Jersey roofing codes accommodate a variety of roofing materials and systems, including asphalt shingles, metal, slate, tile, wood, and solar options, provided they meet code requirements and manufacturer specifications. They also establish minimum standards and criteria for material and system performance, quality, and installation, encompassing fire rating, wind resistance, water resistance, durability, and compatibility.

For instance, according to New Jersey roofing codes, asphalt shingles must attain a minimum Class A fire rating, a minimum Class F wind resistance rating, and a minimum Class G impact resistance rating, as per ASTM standards. Additionally, these codes mandate asphalt shingles installation over a minimum 15-pound felt underlayment, with a minimum 4-inch lap, secured using corrosion-resistant nails, per manufacturer guidelines.

Roof Insulation and Ventilation

In compliance with New Jersey roofing codes, roof insulation, and ventilation must meet energy and mechanical stipulations outlined in building codes, alongside manufacturer guidelines. They must ensure adequate thermal resistance, air tightness, moisture control, and indoor air quality for the roof and the building.

These codes set minimum insulation standards for climate zones and roof assembly types. They prescribe installation methods, materials, tables, and charts for determining insulation values and factors.

For instance, in climate zone 4, covering much of New Jersey, residential buildings must have roof insulation with a minimum R-value of 38. In contrast, commercial buildings require a minimum R-value of 30. Insulation must be continuous and uninterrupted, installed above, below, or within the roof assembly as per the type of roof construction.

Regarding ventilation, New Jersey roofing codes necessitate a minimum net-free ventilating area of 1/150 of the vented space or 1/300 under certain conditions, such as vapor retarder use or a balanced ventilation system. They provide installation methods, materials, tables, and charts for determining ventilation area and ratio.

For example, ridge vents, soffit vents, gable vents, and roof turbines must facilitate roof ventilation. To meet New Jersey roofing code requirements, these vents must be screened, louvered, or otherwise shielded from rain, snow, insects, and animals.

Roof Flashing and Drainage

In alignment with New Jersey roofing codes, roof flashing and drainage systems must adhere to plumbing and fire provisions outlined in building codes and manufacturer instructions and specifications. They are mandated to prevent water leakage and accumulation on roofs and buildings, ensuring sufficient protection and discharge.

These codes delineate minimum requirements and standards governing the design, materials, installation, inspection, and maintenance of roof flashing and drainage components, including slope, size, location, and connection of roof drains, gutters, downspouts, scuppers, and overflow devices. Additionally, they address challenges specific to New Jersey’s climate and environment, such as ice dams, snow guards, and fire sprinklers.

For instance, New Jersey roofing codes dictate that roof slope must not be less than 1/4 inch per foot for asphalt shingles, metal, slate, tile, and wood roofs, and not less than 1/8 inch per foot for built-up, modified bitumen, and single-ply roofs, unless otherwise specified by building codes or manufacturer directives. Furthermore, roof drains, gutters, downspouts, scuppers, and overflow devices must be sized and installed according to rainfall intensity and roof area, with a connection to the storm drainage system or discharge to an approved location per New Jersey roofing codes.

New Jersey Roofing Codes

Q: How can I find the current New Jersey roofing codes for my project?

A: You can access the current New Jersey roofing codes by visiting the New Jersey Department of Community Affairs website. There, you’ll find online versions of the building codes along with any New Jersey-specific amendments and modifications. Alternatively, you can contact your county or city’s local building department or code official to obtain printed copies of the codes and the necessary permits and inspections for your roofing project.

Q: How can I find the future New Jersey roofing codes for my project?

A: Visit the International Code Council website to learn about future New Jersey roofing codes. You can access the latest editions of the International Building Code and the International Residential Code, upon which New Jersey roofing codes are based. Additionally, the New Jersey Department of Community Affairs website provides information on proposed amendments and modifications specific to New Jersey, including opportunities for public participation in hearings and comment periods preceding the adoption and implementation of new building codes.

Q: How can I determine if my roof complies with the New Jersey roofing codes?

A: Hire a licensed and qualified roofing contractor who can inspect and certify your roof’s condition and compliance with New Jersey roofing codes. Alternatively, contact your local building department or code official for an inspection to verify compliance and issue necessary certificates for your roofing project.

Q: How can I ensure my roofer complies with New Jersey roofing codes?

A: Verify your roofer’s license and insurance status through the New Jersey Division of Consumer Affairs website or by contacting local building authorities. Additionally, confirm their credentials and certifications from reputable roofing manufacturers such as GAF, Owens Corning, or CertainTeed. Review their portfolio, testimonials, ratings, and awards, and seek feedback from previous customers.

Q: How can I confirm if my roof materials and systems meet New Jersey roofing codes?

A: Check the approval and label status of your roof materials and systems through the New Jersey Department of Community Affairs or ICC Evaluation Service websites. These agencies evaluate and certify compliance with building codes and standards. Ensure they meet performance, quality, and installation criteria specified by the manufacturer’s instructions.

Q: How can I verify if my roof insulation and ventilation comply with New Jersey roofing codes?

A: Assess your roof insulation and ventilation to determine if they meet New Jersey roofing codes. The minimum insulation levels based on climate zone and roof assembly type can be found on the U.S. Department of Energy website. Similarly, the International Code Council website provides minimum ventilation ratios based on vented space area and ventilation system type.

Facts and Statistics: New Jersey Roofing Codes

Based on data from the U.S. Census Bureau, New Jersey housed 3,281,666 units in 2020. Of these, 64.3% were owner-occupied, while 35.7% were renter-occupied.

According to the New Jersey Department of Labor and Workforce Development, 2,100 roofing contractors operated in the state in 2019. These contractors collectively employed 8,900 workers and had a combined annual payroll of $481,900,000.

The New Jersey Department of Community Affairs reported 2,841 permits issued for roof replacement projects in 2020, totaling $67,914,000 in construction value.

Regarding climate, New Jersey experiences an average annual temperature of 54.1°F. July marks the hottest month, with temperatures reaching 86.8°F, while January records the lowest temperatures, dropping to 23.6°F. The state receives an average annual precipitation of 47.21 inches, with July being the wettest month at 4.72 inches and February the driest at 2.93 inches.

According to the National Oceanic and Atmospheric Administration, New Jersey encountered 14 extreme weather events, each causing over $1 billion in damages between 1980 and 2020. These included 7 tropical cyclones, 4 winter storms, 2 droughts, and 1 inland flood. The costliest event was Hurricane Sandy in 2012, which caused $70.2 billion in damages and 159 fatalities in the region.